Performance Holden Sv6 Ve Vf Orssom Otr Cold Air Intake Sidi Lfx Llt 3.6 3.0 V6 on 2040-parts.com
Melbourne, VIC, Australia
 
{tit}{cp}PERFORMANCE HOLDEN SV6 VE VF ORSSOM OTR COLD AIR INTAKE SIDI LFX LLT 3.6 3.0 V6 (To suit LLT, LFX, LF1 & LFW, for Alloytec motors please view our other listings!)Our OTR cold air intake provides a range of benefits as listed below:
The OTR can be fitted using simple hand tools in around 45mins & the kit comes with the K&N filter and all parts required for fitment. This specially designed kit is simple for any DIY enthusiast to install and requires no drilling of the vehicle's bodywork or even the kit itself. We have seen gains in standard vehicles of 7rwkw depending on supporting modifications. Please note that a tune is mandatory for this product in order to achieve perfect drivability and even greater power gains. The factory intake is very limiting, as the engine must draw in air through the 90 degree curved intake pipe, turbulence generating air box and restrictive paper panel filter. The intake is designed in such a way in order to limit noise but unfortunately lowers the volumetric efficiency of the engine hence robbing it of power. Not only will this OTR Cold Air Intake kit result in an instantaneous power increase, but it will also supplement and bring the best out of future modification. There is:
Kit Contains:
Intake's must be used with Factory Air Flow Meter Please Note: A custom tune is required when installing this OTR Part Numbers - |
For additional support, please refer to the link below
MACE Support -Product Assistance Guide
To submit a formal enquiry about any of our products or services, please click on the link below
MACE Support - Submit an enquiry
DOMESTIC ORDERS
Orders typically take 1-3 business days to prepare and process prior to dispatch. Freight may take 1-10 business days from the date of dispatch to delivery within Australia. No Weekend Deliveries.
To Calculate freight costs simply proceed to the checkout where shipping will be calculated automatically.
**COD (CASH ON DELIVERY) IS ROAD FREIGHTED AND WILL TAKE 3-10 WORKING DAYS FOR DELIVERY FOR MORE INFORMATION ON COD PLEASE CLICK HERE**
INTERNATIONAL ORDERS
When you are checking out an international order, please complete all the necessary information. You must select your region from the delivery method drop down menu, to get the correct shipping costs.
Orders outside of Australia may take up to 4 weeks.
*You will be responsible for any applicable taxes and/or duties and will need to be paid upon delivery*
*Saturday and Sunday IS NOT business days*
We at MACE ENGINEERING are a design company specialising in automotive product development. From a one off custom design right through to mass manufacturing, product we can deliver.
With over 25 years of experience, you can be assured we’ll make it happen for you. In addition to automotive products, we’ve also been involved in the design and manufacture of other items such as steel structures for the manufacturing and movie industries, consumer products, specialised machinery and electronics engineering and all things that help improve the performance of your Holden or Ford.
Copyright 2010 MACE ENGINEERING GROUP
Air Intake Systems for Sale
Performance cold air intake to suit holden hsv commodore vt 5.0l 5lt v8(AU $270.00)
Sunbeam tiger aluminum small block v8 high rise intake manifold(US $529.95)
K&n 57i-1000 performance intake kit
Bcp red 93-97 civic del sol 1.5/1.6 short ram air intake induction kit + filter(US $44.19)
Bmw e92(US $19.99)
E1t10372 kl47-18-211 map sensor for mazda protege 626 millenia rx-8 miata 3 6(US $34.22)
Boris lets motorbikes in bus lanes
Mon, 05 Jan 2009It wasn’t too difficult to make the choice between Ken and Boris in the last London Mayor elections. Ken had done much that got under the skin of the average Londoner, and it was time for a change. But, however affable Boris is, it always seemed likely he could easily cock everything up.
Nissan Juke R takes to the track on video
Fri, 09 Dec 2011The road-legal Nissan Juke R may never be built, but today Nissan showed off its the GT-R-powered Juke performing on track. It's a madcap one-off Juke pepped up with the GT-R's 523bhp 3.8-litre twin-turbo V6. The video below was recorded at the MIRA track in Warwickshire, as engineers had a chance to fine-tune the chassis.
JLR to build Range Rover Evoque & Jaguar XJ in India
Mon, 10 Feb 2014The 2014 Range Rover Evoque (pictured) joins the Jaguar XJ as new Indian-built cars Jaguar Land Rover already bolt together the Land Rover Freelander and Jaguar XF in India, which explains why they are the best-selling models in JLR’s range in India. That’s because import duties for cars in India can be as much as 170 per cent, so building cars locally make them much more competitively priced. At the Delhi Auto Expo Ralph Speth, JLR’s CEO, confirmed plans to start building the Jaguar XJ in India (including the XJ with the 2.0 litre EcoBoost engine), despite the complexity of producing as complex a car as the XJ outside the UK.